Acta Mechanica Slovaca 2021, 25(1):14-19 | DOI: 10.21496/ams.2021.012

Principles of Management and Position of Maintenance in the I4.0 Environment

Hana Pačaiová ORCID...1, *, Anna Nagyová1, Renáta Turisová ORCID...1, Ján Hijj1, Tomáš Vilinský1, Katarína Firmentová1
1 Technical University of Kosice, Faculty of Mechanical Engineering, Department of Safety and Quality, Letná 1/9, 042 00 Košice - Sever, Slovakia

At present, the management of organizations is dominated by efforts to integrate management systems, based on risk management. The introduction of digitization and the application of appropriate methodological tools make it possible to optimize key processes and information flows, increase data reliability and thus support management decision-making. This article describes the development and current trends in the management of organizations, analyses the principles of management, and approaches to maintenance management (MM), with respect to the requirements of Industry 4.0 (MM4.0). Based on this analysis, and through two research questions asked, it qualitative evaluates the effects of the nine basic pillars of Industry 4.0 on the implementation of a comprehensive approach in management systems, draws attention to the gaps of misunderstanding or non-use of appropriate tools in process management as well as in maintenance management. Finally, it presents a consideration of the development of new comprehensive management concepts integrated into a comprehensive management system in the Industry 4.0 environment, and through positive responses to RQs it creates space for further research in the field of MSI4.0 and MM4.0.

Keywords: management system; maintenance management; Industry 4.0; quality management principles

Received: March 8, 2021; Revised: March 24, 2021; Accepted: March 25, 2021; Published: March 26, 2021  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Pačaiová, H., Nagyová, A., Turisová, R., Hijj, J., Vilinský, T., & Firmentová, K. (2021). Principles of Management and Position of Maintenance in the I4.0 Environment. Acta Mechanica Slovaca, 25(1), 14-19. doi: 10.21496/ams.2021.012
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. Ghobakhloo, M. (2020). Industry 4.0, digitization, and opportunities for sustainability. Journal of Cleaner Production, 252, 1-21, doi:10.1016/j.jclepro.2019.119869. Go to original source...
    2. Lee, J., Cameron, I., Hassall, M. (2019). Improving process safety: What roles for Digitalization and Industry 4.0? Process Safety and Environmental Protection, 132, 325-339, doi.10.1016/j.psep.2019.10.021. Go to original source...
    3. Pereira, A.C., Romero, F. (2017). A review of the meanings and the implications of the Industry 4.0 concept. Procedia Manufacturing, 13, 1206-1214, doi:10.1016/j.promfg.2017.09.032. Go to original source...
    4. Cerioni, L. (2012). The "Place of Effective Management" as a Connecting Factor for Companies' Tax Residence Within the EU vs. the Freedom of Establishment: The Need for a Rethinking? German Law Journal, 13(9), 1095-1130. doi:10.1017/S2071832200018071. Go to original source...
    5. Corpuz, R., S., A. (2020). ISO 9001:2015 Risk-based Thinking: A Framework using Fuzzy-Support Vector Machine. Makara journal of technology, 24, 149-159, doi:10.7454/mst.v24i3.3944. Go to original source...
    6. Dai, F.C, Lee, C.F., Ngai, Y.Y. (2002) Landslide risk assessment and management: an overview, Engineering Geology, 64, 65-87, doi:10.1016/S0013-7952(01)00093-X. Go to original source...
    7. Trkman, P., Indihar Štemberger, M., Jaklič, J. and Groznik, A. (2007). Process approach to supply chain integration, Supply Chain Management, 12, 116-128, doi:10.1108/13598540710737307. Go to original source...
    8. Torabi, S.A., Rezaei Soufi, H., Sahebjamnia, N. (2014). A new framework for business impact analysis in business continuity management (with a case study), Safety Science, 68, 309-323, doi:10.1016/j.ssci.2014.04.017. Go to original source...
    9. Alcácer, V.; Cruz-Machado, V. (2019). Scanning the Industry 4.0: A Literature Review on Technologies for Manufacturing Systems. Engineering Science and Technology, an International Journal, 22, 899-919, doi:10.1016/j.jestch.2019.01.006. Go to original source...
    10. Kumar, U., Galar, D., Parida, A., Stenström, C. and Berges, L. (2013). Maintenance performance metrics: a state-of-the-art review, Journal of Quality in Maintenance Engineering, 19, 233-277, doi:10.1108/JQME-05-2013-0029. Go to original source...
    11. Pacaiova, H., Nagyova, A., Namesanska, J., Grencik, J. (2013). Systematic approach in maintenance management improvement. International Journal of Strategic Engineering Asset Management (IJSEAM), 1, doi:10.1504/IJSEAM.2013.056322. Go to original source...
    12. Sobaszek, Ł., Gola, A., Świć, A. (2020). Time-based machine failure prediction in multi-machine manufacturing systems. Eksploatacja i Niezawodnosc - Maintenance and Reliability, 22, 52-62, doi:10.17531/ein.2020.1.7. Go to original source...
    13. Johansson, N., Roth, E., Reim, W. (2019). Smart and Sustainable eMaintenance: Capabilities for Digitalization of Maintenance. Sustainability, 11, 3553, doi:10.3390/su11133553. Go to original source...
    14. Iunga, B., Levrata, E., Marquezb, A.C., Erbec, H. (2009). Conceptual framework for e-Maintenance: Illustration by e-Maintenance technologies and platforms. Annual Reviews in Control, 33, 220-229, doi:10.1016/j.arcontrol.2009.05.005. Go to original source...
    15. Jasiulewicz - Kaczmarek, M., Gola, A. (2019). Maintenance 4.0 Technologies for Sustainable Manufacturing - an Overview. IFAC-Papers On Line, 52, 91-96, doi:10.1016/j.ifacol.2019.10.005. Go to original source...
    16. Cachada, A. et al. (2018). Maintenance 4.0: Intelligent and Predictive Maintenance System Architecture. In 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA), Turin, 2018, 139-146, doi:10.1109/ETFA.2018.8502489. Go to original source...
    17. Bokrantz, J., Skoogh, A., Berlin, C., Wuest, T., Stahre, J. (2020) Smart Maintenance: a research agenda for industrial maintenance management. International Journal of Production Economics, 224,1-14, doi:10.1016/j.ijpe.2019.107547. Go to original source...
    18. Bumblauskas, D., Gemmill, D., Igou, A., Anzengruber, J. (2017). Smart Maintenance Decision Support Systems (SMDSS) based on corporate big data analytics. Expert Systems with Applications, 90, 303-317, doi:10.1016/j.eswa.2017.08.025. Go to original source...
    19. Turisová, R., Sinay, J., Pačaiová, H., Kotianová, Z., Glatz, J. (2020). Application of the EFQM Model to Assess the Readiness and Sustainability of the Implementation of I4.0 in Slovakian Companies. Sustainability, 12, 1-14, doi:10.3390/su12145591. Go to original source...
    20. Hovanec, M., Pačaiová, H., Hrozek, F., Varga, M. (2014). Proactive Ergonomics Based on Digitalization Using 3D Scanning and Workplace Modeling in Texnomatix Jack with Augmented Reality‎. Nase more, 61, 22-26.
    21. Pačaiová H.; Glatz J.; Kacvinský, Š. (2012). Positive and negative aspect in application of maintenance management philosophy. Journal of Applied Engineering Science, 10, 99-105, doi:10.5937/jaes10-2131. Go to original source...
    22. Bulut, M., Özcan, E. (2021). A new approach to determine maintenance periods of the most critical hydroelectric power plant equipment. Reliability Engineering & System Safety, 205, 107238, doi:10.1016/j.ress.2020.107238. Go to original source...
    23. Maletič, D., Maletič, M., Al-Najjar, B., Gomišček, B. (2020). An Analysis of Physical Asset Management Core Practices and Their Influence on Operational Performance. Sustainability, 12, 9097, doi:10.3390/su12219097. Go to original source...
    24. Talapatra, S., Santos, G., et al. (2019). Main benefits of integrated management systems through literature review. International Journal for Quality Research, 13, 1037-1054, doi:10.24874/IJQR13.04-19. Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content