Acta Mechanica Slovaca 2010, 14(2):78-85

Investigation of Osseointegration of Porous Materials for Orthopedic Implants

Jaroslaw Sidun, Jan Dabrowski
Bialystok University of Technology, Poland

The paper presents research regarding osteointegration of porous materials for implants made for Co-Cr-Mo and titanium with Bioglass type-S2. All the materials were prepared using cold pressing and sintering. The research was made on the castrated goats averaging one year of age, from this oneself herds. Bone growth process on surfaces of implants made with additional bioglass was significantly intense. The amount of osseous tissue and the number of connection points are significantly increased. On surfaces of titanium implants few areas of stochastic callus formation were observed. In that case areas of preferential bone integration have uneven surface due to technological process. A significant difference appears in osseous tissue growth morphology on implant surface. In porous implants bone grows around the pores of an implant. The obtained results showed that porosity influences callus growth intensity beneficially on the implant structure. Use of bioglass increases bone growth intensity on implant surface.

Keywords: Porous Materials, Orthopedic Implants, Implants

Published: October 31, 2010  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Sidun, J., & Dabrowski, J. (2010). Investigation of Osseointegration of Porous Materials for Orthopedic Implants. Acta Mechanica Slovaca, 14(2), 78-85
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. Ankem S., Greene C.A: Recent developments in microstructure/property relationship of beta titanium alloys. Material Science and Engineering A2, Vol. 63 (1999), p. 127-131 Go to original source...
    2. Becker B.S., Bolton J. D., Youseffi M.: Production of porous sintered Co-Cr-Mo alloys for possible surgical implants application. Part 1: Compaction, sintering behaviour and properties. Powder Met., 3, 1995, pp. 201-208 Go to original source...
    3. Chen X., Li Y., Hodgson P.D., Wen C.: Microstructures and bond strengths of the calcium phosphate coatings formed on titanium from different simulated body fluids. Materials Science and Engineering C, Vol. 29 (2009), p. 165-171 Go to original source...
    4. De Aza P.N., Luklinska Z.B., Santos C., Guitian F., De Aza S.: Mechanism of bone-like formation on a bioactive implant in vivo. Biomaterials, 24, 2003, pp. 1437-1455 Go to original source...
    5. Fujibayashi S., Neo M., Hyun-Min Kim, Kokubo T., Nakamura T.: A comparative study between in vivo bone ingrowth and in vitro apatite formation on Na2O-Ca-SiO2 glasses. Biomaterials, 24, 2003, pp.1349-1356 Go to original source...
    6. Gangming L., Sadegh Ali M., Alexander H., Jaffe W., Scott D.: The effect of surface roughness on the stress adaptation of trabecular architecture around a cylindrical implant, Jurnal of Biomechanics, 32, 1999, pp. 275-284 Go to original source...
    7. Gondolph-Zink B.: Influence of hydroxylapatit-coating on the osseointegration of weight-bearing and non-weightbearing implants in comparision to other surfaces with microporous structures. An animal experimental study. Orthopäde, 27, 1998, pp. 96-104 Go to original source...
    8. He G., Hagiwara M.: Ti alloy design strategy for biomedical applications. Materials Science and Engineering C, Vol. 26 (2006), p. 14-19 Go to original source...
    9. Hench L.L: Bioactive materials: The potential for tissue regeneration. Society for Biomaterials 24th Annual Meeting, San Diego, CA, 1998, 22-26
    10. Ho W.F., Ju C.P., Lin Ch.: Structure and properties of cast binary Ti-Mo alloy. Biomaterials, Vol. 20 (1999), p. 2115-2122 Go to original source...
    11. Kokubo T., Takadama H.: How useful is SBF in predicting in vivo bone bioactivity?Biomaterials, Vol. 27 (2006), p. 2907-2915 Go to original source...
    12. Lin J.H., Chang Ch.H., Chen Y.S., Lin G.T: Formation of bone-like apatite on titanium filament by a simulated body fluid inducing process. Surface & Coatings Technology, Vol. 200 (2006), p. 3665-3669 Go to original source...
    13. Long M., Rack H.J.: Titanium alloys in total joint replacement-a materials science perspective. Biomaterials, Vol.19 (1998), p. 1621-1639 Go to original source...
    14. Lopez-sastre A., Gonzalo-Orden J.M., Altonaga J.A.R., Altonaga J.R., Orden M.A.: Coating titanium implants with bioglass and with hydroxyapatite. Comparative study in sheep. International orthopaedics, 22, 1998, pp. 380-383 Go to original source...
    15. Łączka M., Cholewa K., Łączka-Osyczka A.: Gel-derived powders of CaO-P2O5-SiO2 system as a starting material to production of bioactive ceramics. Jurnal of Alloys and Compounds, 248, 1997, pp. 42-51 Go to original source...
    16. Łączka-Osyczka A., Turyna B., Dubin A., Łączka M.: Comparison of biocompatibility of gel-derived bioactive ceramics In macrophage culture conditions. Biomaterials, 18, 1997, pp. 1243-1250 Go to original source...
    17. MacNeil S.: Biomaterials for tissue engineering of skin. Materials today, Vol. 11, No. 5, 2008, pp. 26-35 Go to original source...
    18. Moroni L., Elisseeff J. H.: Biomaterials engineered for integration. Materials today, Vol. 11, No. 5, 2008, pp. 44-51 Go to original source...
    19. Nicoli A.N., Torricellia P., Giavaresia G., Borsavia V., Lengerb H.: A new austenic stainless steel with negligible nickel content: an in vitro and in vivo comparative investigation, Jurnal of Biomaterials, 24, 2003, pp. 4929-4939 Go to original source...
    20. Rammelt S., Schulze E., Hanish U., Biewener A., Holch M., Worch H., Zwipp H.: Immunohistochemical investigation on the interface of collagencoated titanium pins, III Congreso Internacional de Biomateriales BIOMAT'03, 2003
    21. Ryan G., Pandit A., Apatsidid D.P.: Fabrication methods of porous metals for use in orthopedic applications. Biomaterials, Vol. 27 (2006), p. 2651-2670 Go to original source...
    22. Simon U., Augat P., Ignatius A., Claes L.: Influence of the stiffness of bone defect implants on the mechanical conditions at the interface - a finite element analysis with contact. Jurnal of Biomechanics, 36, 2003, pp.1079-1086 Go to original source...
    23. Smith L.G., Karagianes M.T.: Histological preparation of bone to study ingrowth into implanted materials. Calc. Tiss. Res. 14, 1974, pp.333-337 Go to original source...
    24. Stevens M.M.: Biomaterials for bone tissue engineering. Materials today, Vol. 11, No. 5, 2008, pp. 18-25 Go to original source...
    25. Suzuki K., Aoki K., Ohya K.: Effects of surface roughness of titanium implants on bone remodeling activity of femur in rabbits. Bone, 21(6), 1997, pp. 507-514 Go to original source...
    26. Taddei E.B., Henriques V.A.R., Silva C.R.M, Cairo C.A.A.: Production of new titanium alloy for orthopedic implants. Materials Science and Engineering C, Vol. 24 (2004), p. 683-687 Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content