Acta Mechanica Slovaca 2023, 27(2):42-47 | DOI: 10.21496/ams.2023.025

Analysis of the Alternative Robotic Palletizing Processes in the Aspect of Electric Energy Consumption

£ukasz Sobaszek ORCID...1, *
Department of Production Computerisation and Robotisation, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland

Modern implementations of industrial robots require the use of extensive knowledge and novel concepts. To bring real benefits, robotized processes must be analysed in detail. This paper presents a preliminary study on the analysis of electric energy consumption of an industrial robot in the alternative palletization processes. Firstly, the robotization of manufacturing processes aspect was discussed and advantages of the robotic palletizing process were presented. Secondly, the utilized off-line robot programming environment and a model of the robotic workstation used during the study were described. Conducting analyses based on the alternative arrangement of elements in a pallet layer allowed discussion and the formulation of important conclusions. The research has confirmed the validity of detailed analysis of robotic production processes.

Keywords: Industrial Robot, Palletizing, Off-Line Programming, Electric Energy Consumption

Received: April 6, 2023; Revised: May 9, 2023; Accepted: May 12, 2023; Published: June 15, 2023  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Sobaszek, £. (2023). Analysis of the Alternative Robotic Palletizing Processes in the Aspect of Electric Energy Consumption. Acta Mechanica Slovaca, 27(2), 42-47. doi: 10.21496/ams.2023.025
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. Knudsen, M., Kaivo-Oja, J. (2020). Collaborative Robots: Frontiers of Current Literature. Journal of Intelligent Systems: Theory and Applications, 3, 2, 13-20. Go to original source...
    2. Mohsin, I., He, K., Li, Z., Du, R. (2019). Path planning under force control in robotic polishing of the complex curved surfaces. Applied Sciences, 9, 5489. Go to original source...
    3. Sobaszek, £., ¦wię, A. (2021). Scheduling the Process of Robot Welding of Thin-Walled Steel Sheet Structures under Constraint. Applied Sciences, 11, 12, 1-13. Go to original source...
    4. Dawande, M., Geismar, H. N., Sethi, S. P., Sriskandarajah, C. (2005). Sequencing and scheduling in robotic cells: Recent developments. Journal of Scheduling, 8, 387-426. Go to original source...
    5. Rudawska, A., Miturska, I., Szabelski, J., Skoczylas, A., Dro¼dziel, P., Boci±ga, E., Madleņįk, R., Kasperek, D. (2017). Experimental research and statistic analysis of polymer composite adhesive joints strength. Journal of Physics: Conference Series, 842, 012074. Go to original source...
    6. Shabtay, D. Arviv, K. (2016). Optimal robot scheduling to minimize the makespan in a three-machine flow-shop environment with job-independent processing times. Applied Mathematical Modelling, 40, 4231-4247. Go to original source...
    7. Zacharia, P. T., Xidias, E. K., Aspragathos, N. A. (2013). Task scheduling and motion planning for an industrial manipulator. Robotics and Computer-Integrated Manufacturing, 29, 449-462. Go to original source...
    8. Focant, G., Fontaine, B., Steinicke, L., Joudrier, L. A. (2006). Robotics Task Scheduler-TAPAS. Tokhi M. O., Virk G. S., Hossain M. A., Climbing and Walking Robots. Springer, Berlin, Heidelberg. Go to original source...
    9. Baizid, K., Meddahi, A., Yousnadj, A., Chellali, R., Khan, H., Iqbal, J. (2014). Robotized task time scheduling and optimization based on Genetic Algorithms for non redundant industrial manipulators. In: Proceedings of the 2014 IEEE International Symposium on Robotic and Sensors Environments (ROSE) Proceedings, Timisoara. Go to original source...
    10. Zhang, J., Meng, Q., Feng, X., Shen, H. (2018). A 6-DOF robot-time optimal trajectory planning based on an improved genetic algorithm. Robotics and Biomimetics, 5, 3. Go to original source...
    11. Bahani, A., Ech-Chhibat, E. C., Samri, H., Ait El Attar, H., Ait Maalem, L. (2023). Intelligent control of the gripping force of an object by two computer-controlled cooperative robots. Applied Computer Science, 19, 1, 133-151. Go to original source...
    12. Aiming, L., Huan, L., Bitao, Y., Wenjun, X., Ming, Y. (2018). Energy consumption modeling of industrial robot based on simulated power data and parameter identification. Advances in Mechanical Engineering, 10. Go to original source...
    13. Hou, L., Zhang, L., Kim, J. (2019). Energy Modeling and Power Measurement for Mobile Robots. Energies, 12, 27. Go to original source...
    14. Abdelfetah, H., Aouache, M., Abderraouf, M., Akli, I. (2018). Key Challenges and Open Issues of Industrial Collaborative Robotics. IEEE International Conference on Robot and Human Interactive Communication (IEEE RO-MAN 2018), Workshop on Human-Robot Interaction: From Service to Industry (HRI-SI2018).
    15. Ning, F., Yun, C., Chen, X. (2008). Dynamic Analysis and Control of the MJR Robot Palletizer. In: Xiong, C., Liu, H., Huang, Y., Xiong, Y., Intelligent Robotics and Applications. ICIRA 2008. Lecture Notes in Computer Science. Springer, Berlin, Heidelberg. Go to original source...
    16. Weijie, G., Lihong, W. (2019). Design of Robots' Automatic Packaging and Palletizing. IOP International Conference on Energy Equipment Science and Engineering, 242, 032030. Go to original source...
    17. Bernier, C. Palletizing Robots and Their Impact on Production and Revenue, from https://howtorobot.com/expert-insight/palletizing-robots, 05-04-2023.
    18. Miroshnyk, O., Kovalyshyn, S., Tomporowski, A., Kruszelnicka, W., Ba³dowska-Witos, P. (2020). Research of probability characteristics of current and voltage unbalance based on using graphs of load for the duration at the substation. Journal of Physics: Conference Series, 1426, 1, 012036. Go to original source...
    19. Sobaszek, £., Gola, A., Varga, J. (2016). Virtual Designing of Robotic Workstations. Applied Mechanics and Materials, 844, 31-37. Go to original source...
    20. Z series - The Flexible Heavy-Duty Robots (2014). ZXE165U robot specification. Kawasaki Robotics.
    21. Mecalux. Jak prawid³owo przygotowaę palety do transportu?, from https://www.mecalux.pl/podrecznik-magazynowania/palety/jak-prawidlowo-przygotowac-palety-do-transportu, 22-03-2023

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content