Acta Mechanica Slovaca 2023, 27(2):6-11 | DOI: 10.21496/ams.2022.018
Mathematical Model and Simulation of in-pipe Robot1. Introduction
- Technical University of Košice, Faculty of Mechanical Engineering, Letná 9, 04200 Košice, Slovak Republic
At a time when most professions are undergoing massive automation and transformation there are still quite a few professions that have not changed in the past fifty years. One of those professions is chimney sweeping. This thought led to the initial idea for this paper. In this paper, we have proposed a design of an in-pipe robot that could be used for chimney cleaning and inspection. Mathematical modelling of the movement of the robot and actuators was carried out, which allowed us to study the proposed design. Since the mathematical model is quite abstract, computer simulations were done in order to prove the mathematical model, with the possibility to further parameters adjustment of the robot. After the simulations were concluded, the total distance and total time of one cycle of the actuator were obtained.
Keywords: mathematical modelling; simulation; robotics; in-pipe robot, inspection
Received: August 25, 2022; Revised: September 12, 2022; Accepted: September 21, 2022; Published: June 15, 2023 Show citation
References
- Roh, S.; Kim, D.W., Lee, J.; Moon H.; Choi, H.R. In-pipe Robot Based on Selective Drive Mechanism. International Journal of Control, Automation, and Systems. 2009, 105-112. DOI: 10.1007/s12555-009-0113-z.
Go to original source...
- Deepak, B.B.V.L, Raju Bahubalendruni, M.V.A.; Biswal, M.V.A. Development of in-pipe robots for inspection and cleaning tasks. International Journal of Intelligent Unmanned Systems. 2016, 182-210.
Go to original source...
- Kakogawa, A.; Ma, S. Design of a multilink-articulated wheeled inspection robot for winding pipelines: AIRo-II. In Proceedings of the 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Daejeon, Korea, 9-14 October 2016; pp. 2115-2121.
Go to original source...
- Nayak, A.; Pradhan, S. K. Design of a New In-Pipe Inspection Robot. Procedia Engineering. India, 2014, , 2081 - 2091.
Go to original source...
- Li, H.; Li, R.; Zhang, J.; Zhang, P. Development of a Pipeline Inspection Robot for the Standard Oil Pipeline of China National Petroleum Corporation. Appl. Sci. 2020, 10, 2853.
Go to original source...
- Thomaso, S.; Germano, P.; Martinez, T.; Perriad, Y.. An unethered mechanically-intelligent inchwork robot powered by a shape memory alloy oscillator. Sensors and Actuators A: Physical, 2021; DOI: doi.org/10.1016/j.sna.2021.113115
Go to original source...
- Amakawa T et al 2017 Proposing an adhesion unit for a travelling-wave-type, the omnidirectional wall-climbing robot in airplane body inspection applications 2017 IEEE Int. Conf. on Mechatronics (ICM) (IEEE) 178-83
Go to original source...
- Yum, Y.-J.; Hwang, H.; Kelemen, M.; Maxim, V.; Frankovský, P. In-pipe micromachine locomotion via the inertial stepping principle. J. Mech. Sci. Technol. 2014, 28, 3237-3247.
Go to original source...
- Nieuwenhuisen, M.; Quenzel, J.; Beul, M.; Droeschel, D.; Houben, S.; Behnke, S. (2017). ChimneySpector: Autonomous MAV-based Indoor Chimney Inspection Employing 3D Laser Localization and Textured Surface Reconstruction. 10.1109/ICUAS.2017.7991427.
Go to original source...
- E. Zheng and J. Chen, "A Method for Corrosion Image Acquisition of Chimney Inner," 2019 Chinese Control And Decision Conference (CCDC), 2019, pp. 6411-6415, doi: 10.1109/CCDC.2019.8833044
Go to original source...
This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.