Acta Mechanica Slovaca 2023, 27(1):48-57 | DOI: 10.21496/ams.2023.011

Effect of Tool Speed when Joining Dissimilar Materials by Flowdrill Technology

Nikita Veligotskyi ORCID...1, *, Erik Janoąko ORCID...1, Anna Guzanová ORCID...1, Dagmar Draganovská ORCID...1
Technical University of Koąice, Faculty of Mechanical Engineering, Department of Technology, Materials and Computer Supported Production, Mäsiarska 74, 040 01 Koąice

This paper deals with the investigation of the effect of rotation speed on the form fit joint of dissimilar materials. Thin -walled materials based on steel and aluminium alloy were joined by thermal drilling. The shape and size of the resulting bushing were evaluated. It turned out that the best material combination for joining by flowdrill technology are joints made of steel and aluminum alloy. Aluminum alloy must always be placed in the bottom position. The best parameters of the formed bushing were achieved with the combination of DC-Al or TL-Al materials, at tool speeds of at least 2400 rpm.

Keywords: joining, flowdrill, thin-walled metal sheets, steel, aluminum

Received: December 12, 2022; Revised: February 14, 2023; Accepted: February 23, 2023; Published: March 24, 2023  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Veligotskyi, N., Janoąko, E., Guzanová, A., & Draganovská, D. (2023). Effect of Tool Speed when Joining Dissimilar Materials by Flowdrill Technology. Acta Mechanica Slovaca, 27(1), 48-57. doi: 10.21496/ams.2023.011
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. European Aluminium Association: Hybrid joining techniques. Title, from https://www.aec.org/page/extrus ion-aluminum- joining-manual (accessed on 07-02-2022).
    2. W.S. Messler, Joining of advanced materials , 1st Butterworth-Heinemann: Oxford, United Kingdom, 1993; 560 p.
    3. K. Mori, N. Bay, L. Frantini, F. Micari, A.E. Tekkaya, CIRP Annals - Manuf. Techno l. 2013, 62, 673-694. Go to original source...
    4. K. Martinsen, S.J. Hu, B.E. Carlson, CIRP Annals - Manuf.Technol. 2015, 64, 679-699. Go to original source...
    5. M. Kleiner, M. Geiger, A. Klaus, CIRP Annals - Manuf. Technol. 2003, 52, 521-542. https://doi.org/10.1016/S0007- 8506(07)60202-9. Go to original source...
    6. M. Graf, S.P. Sikora, C.S. Roider, Thin-Walled Struct. 2018, 130, 286-296. Go to original source...
    7. F. Aslan, L. Langlois, T. Balan, Int. J. Adv. Manuf. Technol. 2019, 104, 2377 - 2388. Go to original source...
    8. P. Krasauskas, Mechanika (Kaunas) 2011, 17, 681-686. Go to original source...
    9. C. Özek, Z. Demir, TEM-Journal 2013, 2, 93 - 101.
    10. R. Kumar, N.R.J. Hynes, Int. J. Light. Mat. Manuf. 2019, 2, 193 - 205. Go to original source...
    11. R. Kumar, N.R.J. Hynes, C.I. Pruncu, J.A.J. Sujana, J. Clean. Prod. 2019, 236, 117711. Go to original source...
    12. P. Shalamov, M. Pivtsaeva, A. Chvanova, Shamgunov, A., Mater. Today 2021, 38, 1931-1935. Go to original source...
    13. Innovative Manufacturing Research Centre, Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Clinching for sheet materials. Science Technology of Advanced Materials, 2017, pp. 381-405. Go to original source...
    14. Ebnesajjad, S.; Landrock H. Arthur.; Adhesives Technology, 3rd ed.; Elsevier, United States, 2014; pp. 3-4
    15. Flowdrill. User Guide. Title, from https://www.ipro.si/upload/articles_files/articles_file1503317485.pdf (accessed on 12.11.2022)
    16. Heiler R. Flow drilling technology and thread forming - an economical and secure connection in hollow sections and thin-walled components. Web of Conferences 97, 2019, 8. Go to original source...
    17. R. Schmerler, F. Rothe, M. Grunert, Hybrid joining using the flow drill techno logy. Available on the internet: https://www.researchgate.net/publication/341616091_Hybridfugen_ durch_Fliesslochformen_Hybrid_joining_using_the_flow_drill_technology (accessed on 17-01-2022).
    18. Simufact Forming. Title, from https://www.simufact.com/simufactforming-forming-simulation.html (accessed on 12.11.2022)
    19. X. Luan, O. El Fakir, H.X. Gao, J. Liu, L.L. Wang, Formability of AA6082-T6 at Warm and Hot Stamping Conditions. Key Engineering Materials, 2016, 716, 107-113. https://doi.org/10.4028/www.scientific.net/kem.716.107 Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content