Acta Mechanica Slovaca 2019, 23(4):24-29 | DOI: 10.21496/ams.2020.005

Development of the Device with a High Positioning Accuracy Serving for Residual Stress Quantification using Optical Methods

Miroslav Pástor, Peter Čarák, Martin Hagara
Technical University of Košice, Faculty of Mechanical Engineering Letná 9, 042 00 Košice, Slovakia

The paper describes some procedures required for functional verification of a newly designed unique positioning device developed to quantify residual stresses by modern optical methods with a combination of the hole-drilling method based on ASTM-E 837-13a American standard. The high precision of milling a circular groove or a hole belongs to essential requirements for achieving relevant results in the quantification of residual stresses using semi-destructive methods. At the beginning of the paper, the mechanical parts of the developed drilling device are briefly described. Subsequently, two analyses were realized and present in the paper. While the first one verifies the possibilities and accuracy of the cutter positioning in the vertical direction, the second one is focused on the investigation of the milled groove circularity. The results of both analyses are processed tabularly and prove the possibility to use the drilling device in residual stress analysis.

Keywords: experimental measurement, positioning accuracy, residual stress.

Published: December 20, 2019  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Pástor, M., Čarák, P., & Hagara, M. (2019). Development of the Device with a High Positioning Accuracy Serving for Residual Stress Quantification using Optical Methods. Acta Mechanica Slovaca, 23(4), 24-29. doi: 10.21496/ams.2020.005
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. Lothhammer, L. R., Viotti, M. R., Albertazzi, A., Jr., Veiga, C.L.N. Residual stress measurements in steel pipes using DSPI and the hole-drilling technique (2017), International Journal of Pressure Vessels and Piping, 152, pp. 46-55. Go to original source...
    2. Trebuňa, F., Šimčák, F., Bocko, J., Pástor, M. Analysis of causes of casting pedestal failures and the measures for increasingits residual lifetime (2013), Engineering Failure Analysis, 29, pp. 27-37. Go to original source...
    3. Wang, F. et al. Nondestructive evaluation of the residual stress via digital holographic photoelasticity (2018), Journal of Optics, 47 (4), pp. 547-552. Go to original source...
    4. Procter, E., Beaney, E. M. Recent Developments in Centre-hole Technique for Residual-stress Measurement (1982), Experimental Techniques, 6, pp. 10-15. Go to original source...
    5. Rendler, N. J., Vignes, I. Hole-Drilling Strain Gage Method of Measuring Residual Stresses, Experimental Mechanics (1966), 6 (12), pp. 577-586. Go to original source...
    6. Barsanti, M., Beghini, M., Bertini, L., Monelli, B.D., Santus, C. First-order correction to counter the effect of eccentricity on the hole-drilling integral method with strain-gage rosettes (2016), Journal of Strain Analysis for Engineering Design, 51 (6), pp. 431-443. Go to original source...
    7. Wang, H.C.: The Alignment Error of the Hole-Drilling Method (1979), Experimental Mechanics 17, pp. 23-27. Go to original source...
    8. Sandifer, J. P., Bowie, G. E. Residual Stress by Blind Hole Method with Off-Center Hole (1978), Experimental Mechanics, 18 (5), pp. 173-179. Go to original source...
    9. Barsanti, M., Beghini, M., Santus, C., Benincasa, A., Bertelli, L. Integral method coefficients for the ring-core technique to evaluate non-uniform residual stresses (2018), Journal of Strain Analysis for Engineering Design, 53 (4), pp. 210-224. Go to original source...
    10. Menda, F., Šarga, P., Trebuňa, F. Estimation of residual stress field uniformity when using the Ring-Core method (2014), Residual stresses IX Book Series: Advanced Materials Research, 996, pp. 325-330. Go to original source...
    11. Pappalettere, C. A short survey on residual stress measurements by HDM and ESPI (2018) Conference Proceedings of the Society for Experimental Mechanics Series, 3, pp. 105-110. Go to original source...
    12. Ma, Y., Yao, X., Zhang, D. Axially symmetrical stresses measurement in the cylindrical tube using DIC with hole-drilling (2015), Optics and Lasers in Engineering, 66, pp. 174-180. Go to original source...
    13. Schajer, G.S., Steinzig, M. Full-field calculation of hole-drilling residual stresses from ESPI data (2005), Experimental Mechanics, 45 (6), pp. 526-532. Go to original source...
    14. Nisida, M. A Method for Measuring Stresses on Metal Surface with Photoelasticity (1965), Scientific Papers IPCR, 59 (2), pp. 69-77.
    15. Redner, S. Photoelastic Investigation of Stresses Relieved During Shallow Hole Drilling in Residual Stress Measuring Technology (1974), Proceedings of the International Conference on Methods of Experimental Mechanics, Prague, pp. 342-348.
    16. Valentini, E., Bertelli, L., Benincasa, A. Improvements in the hole-drilling test method for determining residual stressesin polymeric materials (2018), Materials Performance and Characterization, 7 (4), art. no. 123. Go to original source...
    17. Adamčík, F., Kabát, J., Schrötter, M., Jezný, M. Diagnostic of failures in aircraft airborne systems (2017), MOSATT 2017, TUKE, pp. 1-5.
    18. Šarga, P., Trebuňa, F., Šimčák, F., Bocko, J. Determination of the Possible Causes of Cracks in Pins of Quick Operating Valves in Hydroelectric Power Plant (2014), Residual stresses IX Book Series: Advanced Materials Research, 996, pp. 827-832. Go to original source...
    19. Trebuňa, F., Šimčák, F., Bocko, J., Šarga, P., Trebuňa, P., Pástor, M., Mihok, J. Quantification of residual stresses in the weld by the hole-drilling method (2008), Metalurgija, 47 (2), pp. 133-137.
    20. Schajer, G.S., Winiarski, B., Withers, P.J. Hole-Drilling Residual Stress Measurement with Artifact Correction Using Full-Field DIC (2013), Journal of Experimental Mechanics, 53, pp. 255-265. Go to original source...
    21. Hagara, M., Trebuňa, F., Pástor, M., Huňady, R., Lengvarský, P. Analysis of the aspects of residual stresses quantification performed by 3D DIC combined with standardized hole-drilling method (2019), Measurement: Journal of the International Measurement Confederation, 137, pp. 238-256. Go to original source...
    22. Pástor, M., Frankovský, P., Hagara, M., Lengvarský, P. The use of optical methods in the analysis of the areas with stress concentration (2018), Strojnicky Casopis, 68 (2), pp. 61-76.
    23. ASTM E387-13a Standard test method for determining residual stresses by the hole-drilling strain-gage method, 2013. Annual Book of ASTM Standards American Society for Testing and Materials West Conshohocken.
    24. Palaščáková D., Demeč P. Working Precision of the Machining Centre (2018), Acta Mechanica Slovaca, 22 (2), pp. 54-59. Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content