Acta Mechanica Slovaca 2014, 18(3):20-27 | DOI: 10.21496/ams.2014.027

Evaluation of Friction Coefficient of Stamping

Emil Evin1*, Stanislav Németh1, Marek Vyrostek2
1 Technical university in Košice, Faculty of Mechanical Engineering, Department of Technologies and Materials, Mäsiarska 74, 040 01 Košice
2 Production Manager, Zastrova a.s. SNP 86, 06101 Spišská Stará Ves

This In order to define the friction coefficient the simulator of strip drawn test between flat dies and cup test were applied. To evaluate the coefficient between flat dies the modified Coulumb law was used and for defining the friction at drawing edge of die the modified Ouehler formula was applied. Due to these both evaluation processes it was enabled to point out the difference of friction coefficient values in various contact areas of rolling product and the tool. In his paper there are presented the measurement and evaluation processes of friction coefficient by applying the cup test. For experimental research the following types of materials are suitable: DC 05- extra deep drawable steel sheet, DX 54D - extra deep drawable Zn coated steel sheet, austenitic steel sheet DIN 1.4301.

Keywords: Steel sheets, coefficient friction, measurement

Published: October 31, 2014  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Evin, E., Németh, S., & Vyrostek, M. (2014). Evaluation of Friction Coefficient of Stamping. Acta Mechanica Slovaca, 18(3-4), 20-27. doi: 10.21496/ams.2014.027
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. Doege E, Droder B, Greisbach B (1997) On development of new characteristic value for the evaluation of sheet metal formability. Journal of Materials Processing Technology 71:152-159. Go to original source...
    2. Lange K (1990) Umformtechnik - Blechbearbeitung. Springer/Verlag, Berlin. Go to original source...
    3. Mahrenholtz O, Bontcheva N, (2005) Influence of surface roughness on friction during metal forming processes. Journal of Materials Processing Technology 159:9-16. Go to original source...
    4. Hrivňák, A, Evin E (2004) Formability of steel sheets. Elfa, Košice.
    5. Sniekers RJJM, Smits HAA (1997) Experimental set-up and data processing of the radial strip-drawing friction test. Journal of Materials Processing Technology 66:216-223. Go to original source...
    6. Evin E, Hrivňák A, Tkáčová J (2001) Measurement and evaluation of friction ratios at deep drawing. Journal for Technology of Plasticity 26:81-88.
    7. Evin E, Pinko P, Kmec (2006), Numerical simulation of deep-drawing process and coefficient of friction. Manufacturing Engineering 5:18-22.
    8. Becka J (1997) Tribologie. CVUT, Praha.
    9. Audy J, Evin E (2008) Evaluation of forces and work generated by uncoated and TiN coated tools in backward extrusion of cylindrical - low carbon steel - slugs. Journal Forging 31:7-15.
    10. Audy J, Evin E (2008) Study of friction conditions in deep drawing process with TiN coated tools, Journal Forging. 33:117-118. Go to original source...
    11. Audy J, Evin E (2008) Exploring efficiency of tool coating via deep drawing of cylindrical cups. MMScience Journal 2:20-23. Go to original source...
    12. Zhenyu H, Vollertsen, F (2004) A new friction test method. Journal for Technology of Plasticity 29:1-9.
    13. Pradeep Menezes L, Kumar K, Kishore and Satish V (209) Influence of friction during forming processes-a study using a numerical simulation technique. The International Journal of Advanced Manufacturing Technology.

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content