Acta Mechanica Slovaca 2014, 18(2):70-75 | DOI: 10.21496/ams.2014.022

Study of the Vibratory Behavior of Composite Plates under the Effect of Different Reinforcement Parameters

Abdelmalek Abdelmalek1*, Bouazza Mokhtar2
1 Department of Mechanical Engineerin, University of Bechar
2 Department of Civil Engineering, University of Bechar, BP 147,Bechar-08000

This contribution consists of the free vibratory behavior analysis of composite plates laminated; the study of the vibration in displacement of such structures rests primarily on the research of the frequencies and the clean modes, the main axis of this study is the enhancement and the discussion of the effects various geometry of plate, the reinforcement fibers orientation and the ratio orthotropic of the material on the oscillation frequencies. The choice of the model that says we have taken into consideration in the simulation, meets the objective of our study and the results are then validated by available literature results.

Keywords: Shell, Plate, Composite, Laminated, Vibration, Frequency

Published: October 31, 2014  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Abdelmalek, A., & Mokhtar, B. (2014). Study of the Vibratory Behavior of Composite Plates under the Effect of Different Reinforcement Parameters. Acta Mechanica Slovaca, 18(2), 70-75. doi: 10.21496/ams.2014.022
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. Chien H. Thai and all, 2012. Analysis of laminated composite plates using higher-order shear deformation plate theory and node-based smoothed discrete shear gap method. Elsevier journal of Applied Mathematical Modeling 36, 5657-5677. Go to original source...
    2. Reissner. E, 1945. The effect of transverse shear deformation on the bending of elastic plates. ASME Journal of Applied Mechanics, 12: A69-A77. Go to original source...
    3. L.H. Wun, Y.Lu, 2011. Free vibration analysis of rectangular plates with internal columns and uniform elastic edg support, International Journal of Mechanical Sciences 53,494-504. Go to original source...
    4. Bouazza M. and all, 2010. Bending Analysis of Symmetrically Laminated Plates. Leonardo Journal of Sciences, p. 105-116.
    5. SMindlin,R.D, 1951. Influence of rotatory inertia and shear on flexural motion of isotropic, elastic plates. ASME Journal of Applied Mechanics, 18: 31-38. Go to original source...
    6. Liew, K.M., Xiang,Y. and Kitipornchai, S, 1995. Research on thick plate vibration: a literature survey. Journal of Sound and Vibration, 180: 163-176. Go to original source...
    7. Leissa,A.W, 1973. The free vibration of rectangular plates. Journal of Sound and Vibration, 31: 257-293. Go to original source...
    8. H. Matsunaga, 2000. Vibration and stability of cross-ply laminated composite plates according to a global higher-order plate theory, Compos. Struct. 48, 231-244. Go to original source...
    9. Nakasone Y, Yoshimoto S, Stolarski T.A, 2006. Engineering Analysis with ANSYS Software. Elsevier Butterworth-Heinemann Linacre House, Jordan Hill, Oxford OX2 8DP 30 Corporate Drive, Burlington, MA 01803.
    10. W. Zhen, C. Wanji, 2006. Free vibration of laminated composite and sandwich plates using global-local higher-order theory, J. Sound Vib. 298, 333-349. Go to original source...
    11. C.P. Wu, W.Y. Chen, 1994. Vibration and stability of laminated plates based on a local higher-order plate theory, J. Sound Vib. 177 (4) 503-520. Go to original source...
    12. K.N. Cho, C.W. Bert, A.G. Striz, 1991. Free vibration of laminated rectangular plates analyzed by higher-order individual-layer theory, J. Sound Vib. 14,5 429-442. Go to original source...
    13. Akavci, S.S, 2009. Buckling and Free Vibration Analysis of Symmetric and Antisymmetric Laminated Composite Plates on an Elastic Foundation, Journal of Reinforced Plastics and Composites.
    14. Aydogdu, M, 2009. A new shear deformation theory for laminated composite plates. Composite Structures 89, 94-101. Go to original source...
    15. S.AIT YAHIA, 2011. Cross Shear Plate Thick Composite Materials Based On An Elastic, 1st National Seminar on Civil Engineering Materials and Environmental Protection,, Mostaganem, Algeria.
    16. Jiu, H.W and Chen, H.L, 2007. Exact solutions for free vibration analysis of rectangular plates using Bessel functions. Journal of Applied Mechanics, Vol. 74, Pp. 1247 - 1252. Go to original source...
    17. J.N. Reddy, 1979. Free vibration of antisymmetric, angle-ply laminated plates including tranverseshear deformation by the finite element method. Journal of Sound and Vibration, 66(4) :565-640. Go to original source...
    18. Misra, R.K., 2012. Free vibration analysis of isotropic plate, using multiquadric radial basis function. International Journal of Science,Environ ment and technology, Vol., No. 2, 99 - 107.
    19. N.S. Putcha and J.N. Reddy, 1986. Stability and natural vibration analysis of laminated plates by using a mixed element based on a refined plate theory. Journal of Sound and Vibration, 104(2) :285-300. Go to original source...
    20. J.N. Reddy and N.D, 1985. Phan. Stability and vibration of isotropic, orthotropic and laminated plates according to a higher-order shear deformation theory. Journal of Sound and Vibration, 98(2) :157-226. Go to original source...
    21. A. Beakou and M. Touratier, 1993. A rectangular finite element for analysing composite multilayered shallow shells in statics, vibration and buckling. International Journal for Numerical Methods in Engineering, 36 :627-653. Go to original source...
    22. S. Srinivas, C.V. Joga, and A.K. Rao, 1970. An exact analysis for vibration of simply- supported homogeneous and laminated thick rectangular plates. Journal of Sound and Vibration, 12(2) :187-199. Go to original source...
    23. S. Srinivas and A.K. Rao, 1970. Bending, vibration and buckling of simply supported thick orthotropic rectangular plates and laminates. International Journal of Solids and Structures, 6(11) :1463-1543. Go to original source...
    24. R.K. Khare, T. Kant, and A.K. Garg, 2004. Free vibration of composite and sandwich laminates with a higher-order facet shell element. Composite Structures, 65(3-4) :405-418. Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content