Acta Mechanica Slovaca 2012, 16(2):22-30 | DOI: 10.21496/ams.2012.014
Strain Fields Identification of Chosen Cycling Helmets Types by Their Impact Loading
- Department of Applied Mechanics and Mechatronics, Faculty of Mechanical Engineering, Letná 9, 042 00 Košice, Slovak Republic
The use of a modern digital image correlation method to investigation of drop tests of two chosen cycling helmets types is described in this contribution. The first type - Arcore T-16 represents the helmets with more rounded uncomplicated surface and the second one - Longus Entry has flatter but more complicated contour. The investigation was directed to determination of helmets deformation and strain fields during their impact to a barrier. A high-speed system Q-450 Dantec Dynamics with cameras SpeedSense9070 Phantom was used to shoot this short time interval.
Keywords: digital image correlation, drop test, cycling helmet
Received: January 15, 2012; Accepted: May 15, 2012; Published: October 31, 2012 Show citation
References
- SIEBERT T. et al.: New features in digital image correlation techniques. In 22nd DANUBIA-ADRIA Symposium on Experimental Methods in Solid Mechanics, Parma : MONTICELLI TERME, 2005.
- HUŇADY, R.: Možnosti využitia metódy digitálnej obrazovej korelácie v aplikáciách dynamiky. Dizertačná práca. Košice: Technická univerzita v Košiciach, Strojnícka fakulta, 2010.
- HAGARA, M.: Uplatnenie metód obrazovej korelácie v dynamike mechanických sústav. Písomná práca k dizertačnej skúške. Košice: Technická univerzita v Košiciach, Strojnícka fakulta, 2012.
- www.dantecdynamics.com
- TREBUŇA, F. et al.: An Application of High-speed Digital Image Correlation in Determination of Modal Parameters. In Acta Mechanica Slovaca, vol. 15, no. 4, 2011, ISSN 1335-2393
Go to original source...
- TREBUŇA, F. - ŠIMČÁK, F.: Príručka experimentálnej mechaniky. Košice: Typopress, 2007, ISBN 970-80-8073-816-7
This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.