Acta Mechanica Slovaca 2016, 20(2):16-21 | DOI: 10.21496/ams.2016.010

Meshing Condition and Kinematic Properties of non-circular Gear

Silvia Medvecká-Beňová
Technical University of Koąice, Faculty of Mechanical Engineering, Department of Construction, Automotive and Transport Engineering, Letná 9, Koąice

The gearing with changing transmission gear ratio are used in the practice, even though the "standard" gearing with constant transmission gear ratio are used more often. The article examines the mesh conditions proposed in elliptical gears, as I speed and power ratios in this proposed gearings. The work is devoted to the analysis of these kinematic conditions in the proposed gearings and examines their differences from "standard" ring gear transmission with a constant transference number. The problem is solved for elliptical, eccentric gear with a continuously variable gear ratio to a range from 0.5 through 1 to 2.

Keywords: non-circular gear; elliptical gear; variable transmission; kinematic properties

Published: October 31, 2016  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Medvecká-Beňová, S. (2016). Meshing Condition and Kinematic Properties of non-circular Gear. Acta Mechanica Slovaca, 20(2), 16-21. doi: 10.21496/ams.2016.010
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. Czech, P., Wojnar, G., Warczek, J. (2014). Diagnozowanie uszkodzeń wtryskiwaczy w silnikach spalinowych pojazdów przy użyciu analizy bispektrum i radialnych sieci neuronowych. Logistyka, 3, 1181-1187
    2. Doege E., Meinen J., Neumaier T., Schaprian M. (2001). Numerical design of a new forging press drive incorporating non-circular gears. Journal of Engineering Manufacture, 215, 467-471. Go to original source...
    3. Femandez del Rincon, A., Viadero, F, et al. (2013). A model for the study of meshing stiffness in spur gear transmissions. Mechanism and Machine Theory, 61, 30-58. Go to original source...
    4. Litvin F. L. et al. (2008). Design and investigation of gear drives with non-circular gears applied for speed variation and generation of functions. Computer Methods in Applied Mechanics and Engineering, 197, 3783-3802. Go to original source...
    5. Medvecká_Beňová, S. (2015). Deformation and stiffness of spur gear teeth and trheir influence on gear noise. Scientific Journal of Silesian University of Technology: Series Transport, 89, 101-107. Go to original source...
    6. Medvecká_Beňová, S., Vojtková, J. (2014). Aplication of asymetric profile in gearing in gearings with eccentric gears. Zeszyty naukowe Politechniki ¦l±skiej, 85, 1925, 89-93.
    7. Sapieta, M., Dekýą, V., Pastorek, P. (2014). Using of activ thermography and lock-in method with ultrasound exication for detection of material defect. Zeszyty naukowe Politechniki ¦l±skiej, 84, 1907, 119-124.
    8. Tong S.-H., Yang D. C. H. (1998). Generation of identical non-circular pitch curves. Journal of mechanical design, 120, 337-341. Go to original source...
    9. Zarebski I., Sałacinski T. (2007). Designing and WEDM manufacturing of non-circular gears. Zbiór referatów na miedzynarodowa konferencje naukowo-techniczna. Warszawa.

    This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content